eta PelletsCompact PC33, Руководство по установке

Страница: 50 / 76

50 www.eta.co.at
Network connection Installation
Mounting the pellet hoses on the discharge
On the ends of both pellet hoses, free around 5 cm of
the copper wire strands from the hoses. Bend the
copper wire strand inside the pellet hose.
Fig. 9-34: Copper wire strands
Push the two pellet hoses onto the connections and
secure them with hose clamps.
9.9 Network connection
Connecting the network adapter for the boiler
From factory, a network cable is already connected to
the control panel which extends out of the cable duct.
Fig. 9-35: Network cable
If the network cable is long enough, connect the plug
directly into the router or the ETA PowerLine. If it is not
long enough, use a network extension (1x plug /
1x socket) to connect to the router or ETA PowerLine.