eta milio 2446, milio 3446, Инструкция по эксплуатации

Страница: 28 / 52

Floor nozzle
After every vacuuming it is recommended to check the brushes or collectors for possible
impurities visually. If you find some impurities, remove them in the way specified below.
Turn the screw in the lower part of the nozzle in the direction of the symbol „ „, then
remove the fastening clamp (Fig. 18). Now you can remove the brush from its position and
clean it. Insert the brush to the nozzle in the opposite direction and secure it properly.
VI. TROUBLESHOOTING
Problem Cause Solution
Motor won‘t start
The battery is discharged. Recharge the battery
The “ ” button is not in the 0
position
Press the “ ” button
The container cannot
be fixed to the
vacuum cleaner
The parts of the filtration
system not inserted properly in
the container
Check / correct insertion of the
protector and the filter in the
container
The suction
performance is not
sufficient
Dust container full Empty the container
Clogged filter Clean or replace the filter
The accessories are blocked Remove the blocking objects
The battery is discharged. Recharge the battery
VII. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electrical or
electronic products must not be disposed of together with municipal waste. For proper
disposal of the product, hand it over at special collection places where it will be taken
over free of charge. Suitable disposal of the product can help to maintain valuable
natural resources and to prevent possible negative impacts on the environment and
human health, which could be the possible consequences of improper waste disposal.
Fines can be imposed for improper disposal of this type of waste in agreement with
the national regulations. This appliance is equipped with a Ni-MH battery with long life.
For environmental protection it is necessary to remove the battery from the appliance
after its service life and the battery and the appliance must be disposed of safely using
special collection networks. Ask for more details at the local authority or at the local waste
collection site.
Replacing battery
Remove the batteries from the appliance only when they are fully discharged (i.e. let
the vacuum cleaner run until its motor stops). Screw out all bolts and open the vacuum
cleaner. Gradually disconnect the lead-in wires and remove the batteries.
Replacement of parts that require intervention in the electric part of the appliance
must be carried out by a specialized service! Failure to comply with the instructions
of the manufacturer will lead to expiration of the right to guarantee repair!
28
GB