eta LAVADO, Инструкция по эксплуатации

Страница: 14 / 46

– Do not combine the appliance (beaters
B
and hooks
C
).
– Do not insert the appliance into any body holes.
– Do not remove the appliance if the drive unit is in operation!
– Make sure that the power supply cable does not get between the rotating parts of the
accessories.
- The work adapters cannot be exchanged when the drive unit is in operation for safety
reasons.
- Check before every connecting of the appliance to power supply whether the switch
A1
is in the
0
position (off) and after completing work always disconnect the appliance from
power supply.
- Always unplug the appliance from power supply if you leave it unattended.
- Do not let children use the appliance without supervision!
- Do not process food at temperature exceeding about 80 °C .
- Never insert e.g. fingers, fork, knife, spatula, spoon into rotating parts of the appliance
and the accessories.
- If the processed food starts to stick to the appliance (e.g. whipping beaters, kneading
hooks ), switch off the appliance and clean the accessories carefully using a spatula.
- Make sure that appliance does not hit walls of containers strongly when handling the
beater.
- The power cord must not be damaged with sharp or hot objects, open fire, it must not be
sunk into water or bent over sharp edges.
- If you need to use the extension cord, it has to be uncorrupted and it has to comply with
the valid standards.
- Never use the appliance for any other purpose than for that described in these
instructions for use!
- The manufacturer is not responsible for damage caused by improper use of the appliance
and the accessories (e.g. food deterioration, fire ) and its guarantee for the appliance
does not apply in situations when the safety warnings above are not complied with.
II. DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES (fig. 1)
A - drive unit
A1 - Multi-function control A3 - holes of the drive for connecting the accessories
A2 - TURBO button A4 - power cord
B - whipping beaters
C - kneading hooks
III. PREPARATION FOR USE
Remove all the packing material and take out the beater with the accessories. Remove
all possible adhesion foils, stick-on labels or paper from the appliance. Before the first
use, wash the parts that will be in contact with food in hot water with a detergent, rinse
them thoroughly with clean water and wipe till dry, or let them dry. Plug the power cord
connector
A4
to an electric socket.
14
GB