eta FRIO 1607, Инструкция по эксплуатации

Страница: 17 / 40

C – Remote control
C1 – Oscillation adjustment button
C2 – Timer setting button
C3 – Mode button (NORMAL/NATURAL/SLEEP)
C4 – Speed setting button (+/-)
C5 – ON / OFF button
III. INSTRUCTIONS FOR USE
Before first use, remove any packaging and protective material (including any protective film)
from the appliance and accessories.
ASSEMBLING:
When assembling the fan, please proceed according to Fig. 1, 2. Prior to mounting the
plastic connecting collar A11 , loosen the bolt A12 so that you could easily put the collar on
the rear and front protecting cover ( A7 / A13 ). After that, tighten slightly the bolt A12 . When
demounting, please proceed in reverse order.
Warning
For safety reasons, the shaft A2 and the propeller nut A10 have an anti-clockwise thread.
CONTROL:
The fan can be operated via control panel B or remote control C . If you want to use the
remote control panel C , primarily insert one CR 2025 3V battery in it (the battery is not part
of package) and be particular about its correct polarity. After you connect the fan to the
electric power network, a LED indicating light above the button B5 lights up, which signalizes
stand-by mode (with an acoustic signal).
Turning the fan on/off
Press the B5 / C5 button to turn the fan on. Press B5 / C5 again to turn the fan off at any time
during operation.
Adjusting the air blow rate
Press the B4 / C4 button to set the air speed in 3 levels. The set stage is indicated by lighting
a corresponding LED indicating light above the button B4 .
Oscillation settings
Press the B1 / C1 button to turn oscillation on. Press the B1 / C1 button again to turn
oscillation off. During oscillation, the fan rotates at an angle of about 45° (back and forth).
Switching-on of oscillation is indicated by lighting a LED indicating light above the button B1 .
Setting the mode
Press the B3 / C3 button to switch between NORMAL/NATURAL/SLEEP modes.
Mode Light indicator Description
NORMAL
Default mode when the fan is turned on; this
is a continuous air blow mode.
NATURAL
Simulation of natural air flow in the nature; the fan
alternately turns the blowing on and off, switching the
blowing speed between all 3 levels.
SLEEP
Silent night mode; the fan alternately turns the air
blowing on and off at the 1.-2. speed.
GB
17 / 35