eta Fenite 5327, Инструкция по эксплуатации

Страница: 14 / 28

III. INSTRUCTIONS FOR USE
Remove all packing material, take out the appliance. Remove all possible adhesion foils,
stick-on labels or paper from the appliance.
ON/OFF switch (A1)
To turn the appliance ON/OFF, press and hold the switch. To set the required temperature
(130°C, 150°C, 170°C, 190°C, 210°C), press the switch shortly.
Note
When you switch ON the appliance and set the required temperature, the signal
light
A2
(indicating the relevant temperature) is flashing. As soon as the required
temperature has been reached, the signal light A2 is ON continuously.
Automatic switch OFF
Auto power off (30 min.).
Hair styling
Use the hot comb on dry or slightly moist hair, never on wet hair. Comb the hair before
using the comb so that they are not tousled. Fix a lock of hair of the moving clip A5 to the
heated-up tube
A3
. Move the hot comb to the end of the hair and then wind the lock in
a desired direction with several turns. Do not wind locks too thick on the tube when hair
styling. Let the heat affect the hair for several seconds then unwind the lock and release.
Repeat the process until the desired hairstyle is achieved. Let the hair cool down before
final styling.
Temperature and type of hair
Low temperature (130 °C) – for fine, bleached or damaged hair,
Medium temperature (150–190 °C) – for normal and wavy hair,
High temperature (210 °C) – for strong and rough hair.
IV. MAINTENANCE
Allow the appliance to cool down before any maintenance! Do not use rough and
aggressive detergents! Treat the surface with a wet and soft cloth. Once cold, store the
curling tongs at a safe place, out of the reach of children and incapacitated persons.
More extensive maintenance or maintenance requiring intervention in the inner
parts of the appliance must be carried out by a professional service! Failure to
comply with the instructions of the manufacturer will lead to expiration of the right
to guarantee repair!
V. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electrical or
electronic products must not be disposed of together with municipal waste.
14
GB
/ 23