eta Fenite 2352, Руководство пользователя

Страница: 17 / 36

GB
17 / 31
– Never immerse the adapter into water or other liquids (not even partly) and do not wash it
in running water!
– The appliance gets hot when charging, which is absolutely normal.
– Charge the battery at a temperature close to the room temperature.
– Do not dispose the battery into fire. There is a risk of explosion!
– Do not charge a battery leaking electrolyte.
– Electrolyte leak is caused by overloading the appliance or using it at extremely high
temperatures. If you spill electrolyte on yourself, wash the area with water and soap and
rinse with lemon juice with vinegar. If electrolyte gets in your eyes, flush with clear water
for several minutes and call a physician immediately.
– Never charge the appliance in direct sunlight or close to heat sources, and if the
temperature is below 10 °C or above 40 °C, adversely affects the accumulator service life.
– Prevent hanging the power adapter cord loosely over desktop edge where children may
reach it.
– The power cord of the adapter must not be damaged with sharp or hot objects or open
fire, and must not be immersed into water or bent over sharp edges.
II. DESCRIPTION OF THE APPLIANCE (Fig. 1)
A – Brush body
A1 – Switch on/off button A6 – Protective cover
A2 – Increase in vibration intensity A7 – Fine cleaning bristles
A3 – Decrease in vibration intensity A8 – Coarse cleaning bristles
A4 – USB power supply connector A9 – Massage waves
A5 –Operation and charging indicator light
B – USB cable *
C– Transport case (the respective version depends on the brush model)
* USB cable : A source with USB terminal may be connected to USB cable (for example AC
power adapter, backup power source, etc.).
III. INSTRUCTIONS FOR USE
Before using the appliance, its battery must be charged first. Charging is possible with the
enclosed USB cable from the mains, i.e. an AC adapter, or a backup power source. While
charging, the appliance cannot be used (with the connected cable).
Charging
– Before the first use or if the appliance was not used for a long time, charge it completely.
– Before charging, remove the protective cover A6 . Once the charging is completed, do not
forget to properly fix the cover in place!
1) Make sure the appliance is switched off.
2) Connect the enclosed USB cable to the power supply terminal, and connect the other
side to a power source, for example to a compatible AC power adapter, or to a backup
power source. While charging, the appliance cannot be in use. If the appliance is turned
on and you start charging, the appliance shall switch off.
3) Do not exceed the designated charging time!