EN - 71
EN
4.9 MOP FUNCTION - WATER TANK OPERATION
Please don't use the water tank on carpet.
Please remove the water tank while charging
To have a better mopping effect, it is suggested using this function in a single room.
4.9.1. Add Water
Open the injection rubber plug, slowly pour into clean water
Under mopping, press
F4
on remote control to change the water flow out level, the
display will show the level: 1, low level; 2, middle level; 3, high level.
The default is middle level.
4.9.2. Install mop cloth
Seal the lid and stick the mop cloth on the bottom of the water tank
Soak the mop cloth with water and wring it with your hands. On the underside there are
surfaces with Velcro, which are designed for attaching the cloth.
Take out the dust bin and install the water tank.