Configuration
7
3
Configuration
Content of this configuration
Only the steps required for the configuration of this
product are described below.
The configuration of the complete heating system is
described in the "Configuration" manual supplied with
the boiler.
Software version X.36.0 or later
The configuration requires software version X.36.0 or
later. An update must be performed if an older software
version is installed.
Starting the configuration assistant
In the system settings,
increase the authorization
to [Service], and open the system configuration menu
with the [Systems configuration] button.
Fig. 3-1: System configuration menu
Start the configuration assistant with the
[Starting
the assistant] button.
Adjusting options in the function block [Boiler]
Select the required function block from the [Selected
function blocks] column:
Open the option and enable the following:
Press the [Accept] button to save.
Further configuration and installation
Continue with configuration and installation of the
heating system as described in the "Configura-
tion" manual supplied with the boiler.
Selected function blocks
HA-C 0
Boiler
Flue gas recirculation
