III. PRePARATIoN FoR use
Remove all packaging material, remove the
accessory. Remove all adhesive foils, stickers
or paper from the appliance. We recommend
washing the glass container before using it
for the first time. The knife section is treated
with oil not harmful to health for technological
reasons. Therefore first fill in the container with
warm water (max. 50 °C) with a small amount
of detergent. Then put the container on the
food processor, set the maximum rotational
speed and run for 1 minute. Then rinse the
container with clear water.
Put the blender with the selected accessories
on a flat, stable, smooth and clean work
surface at the height of at least 85 cm, out of
reach of children and incapacitated people.
Plug power supply fork
A3
to the electric
power. Choose the amount of the processed
food so that the maximum volume of the
containers marked with the gauge line is not
exceeded. Possible short-time mild smoke
when the appliance is operated for the first time
is not a defect and the appliance is not subject
to a complaint for this reason. If the power cord
is wound up in the lower section of the mixer,
unwind it to the required length, and plug it in
an electrical socket.
Controls
1) Rotary knob (
A1
)
-
Position
OFF
= switched off
-
Position
MIN–MAX
= setting the speed
(rotation speed)
2) “
TURBO
” (
A2
) button
-
Snap action switch – the motor runs at
the maximum speed while the button
A2
is pressed (held).
Note:
If you want to use “
TURBO
”
A2
button, the
rotary knob
A1
must be set to any position
between
MIN
and
MAX
.
i
50ml
30ml
10ml
50ml
30ml
10ml
50ml
30ml
10ml
50ml
30ml
10ml
50ml
30ml
10ml
50ml
30ml
10ml
50ml
30ml
10ml
1
CLICK
CLICK
CLICK
CLICK
2
1
3
4
CLICK
5
CLICK
6
CLICK
7
A
A1
b2
b3
b4
C
C1
CLICK
8
A2
A4
A3
B
b1
C1
20
GB
/ 37
