eta Activmix Premium 2103, Инструкция по эксплуатации

Страница: 25 / 48

V. STORAGE
You may coil the supply cord A3 into the space in the housing of the propulsion unit. Store
the appliance after cleaning at a dry, dustfree and safe place, out of reach of children and
incapacitated people.
VI. MAINTENANCE (PIC. 8)
Do not use rough and aggressive detergents! Clean drive unit A with a soft and wet cloth
with a little detergent. Make sure that water does not get inside the appliance! Wash the
accessories in hot water with a detergent right after use, rinse it in clean water and wipe till
dry (you can also wash the accessories in a dishwasher). Knife cleaning procedure: pour
about 0.3 l of clear water in the container, switch on the appliance and remove the impurities
by several pulses. In the case of larger amount of impurities, repeat the procedure several
times, or pour 0.3 litre of water, add a small amount of detergent and switch on the blender
for 15 sec. Be very careful when cleaning the knife! Make sure that the cutting edges
of the accessories are not in contact with hard objects that make them blunt and thus they
reduce their effectiveness. If sealing
B1
,
C3
,
E1
is worn out or damaged, replace it with
a new one (of a similar type).Some food can colour the accessories in some way.
But this does not affect the function of the appliance and it is not a reason for a claim. This
colouring usually disappears after some time. Never dry plastic moldings over a heat source
(e.g. heater, electric / gas stove). Please make sure that the contact surface and sealing
elements are clean, undamaged and properly placed (see Pic. 2).
VII. TROUBLESHOOTING
Problem Cause Solution
The appliance won‘t
start
Power supply not connected Check the power cord, the plug
and the socket
The mixing bowl are not
mounted properly.
Check and fasten to mixing
bowl the right position in order
to unlock the safety lock
Drive unit gives out
strange smell
When you turn it on for the
first time, it can give out
strange smell
This is not a defect nor a cause
for a complaint regarding the
appliance
Drive unit is hot when
touched
Processed food is too heavy
or recommended times of
processing were exceeded
Switch off the appliance, let it
cool down, divide the processed
food into smaller portions and
process them gradually
The appliance stops
working
Knife blocked by hard
ingredients not
recommended for individual
adapters
Switch off the appliance,
remove the ingredients that
were blocking the knife and then
continue work
Liquids leak through
the mixing container
bottom
Sealing or knife are worn,
damaged or incorrectly
placed
Remove the knife and sealing
according to Fig. 2. Use new
components of the same type.
25
GB
/ 42