eta 3892, Инструкция по эксплуатации, Страница: 10 / 24

– The lamp may switch on/off in case of strong electromagnetic interference.
– Do not bend the LED panel and protect it from any impact to prevent its damage.
– Do not use the appliance in bathrooms, near showers and in places with high humidity.
– LEDs cannot be replaced.
– When the lamp is on, the LEDs become warm - do not touch them.
– If the lamp is not to be used for a long time, unplug the adapter from el. power.
–
This appliance is not intended for outdoor use.
–
Do not put or take out the plug to or from a socket with wet hands!
– The appliance must not be used in a damp or wet environment and in any environment with the
danger of fire or explosion (
premises where chemicals, fuels, oils, gases, paints and other
flammable or volatile materials are stored
).
– Only use the appliance in the working position at places with no risk of overturning and
in a sufficient distance from other objects (such as
curtains, drapes
, etc.), heat sources
(e.g.
fireplace, heater, stove, cooker, radiators, hot air ovens, grills
) and wet surfaces
(e. g.
sinks, wash basins
).
– Never put the power cord on hot surfaces and never let it hang over table edge or worktop
edge. If the cord is caught or pulled, e.g. by children, the appliance may overturn and fall down,
causing a serious injury!
– The manufacturer assumes no responsibility for any damage caused by improper handling
of the appliance and its accessories (e.g.
electric shock, fire
), and the appliance guarantee will
become void if any of the aforementioned safety instructions are not observed.
DISPLAY CONTROL
Mode
> switching between time and alarm clock settings (TIME / ALARM)
Set
> setting the time / alarm clock (TIME / ALARM)
1) “TIME” setting mode on the display
Up
> switching hours between AM / FM
Down
> switching temperature units between °C/°F
Setting the time
:
Using the
SET
and
UP/DOWN
buttons, set hours/minutes/year/month/day one by one.
Confirm the individual steps by pressing the
SET
button.
Note
: Press “
Mode
” to exit the settings.
2) “ALARM” setting mode on the display
Up/Down
> activates the alarm/snooze feature (alarm icon/”Zz”)
Setting the alarm clock:
Press the
SET
button and set hours/minutes/snooze time/melody using the
UP/DOWN
buttons.
Confirm the individual steps by pressing the
SET
button.
Note: Press “
Mode
” to exit the settings. To turn off the ringing, press any button.
MAINTENANCE
Do not use coarse and aggressive cleaning agents (e.g. sharp objects, scrapers, diluting
agents or other solvents). Clean with a soft and wet cloth with a little detergent.
GB
10 / 18