eta 1629, Инструкция по эксплуатации

Страница: 15 / 36

A4 – input filter cover (2x)
A5 – input foam filter (2x)
A6 – vessel for aromatic additives (e.g. essential oils)
A7 – ultrasound converter
A8 – power supply
B – water tank
B1 – lid with a baffle B4 – cap with a valve
B2 – folding handle B5 – sealing
B3 – watermark
III . PREPARATION FOR USE
Remove all packaging, take the humidifier out. Remove all adhesion foils, stickers or paper
from the humidifier.
CONTROL
When the appliance is plugged into the power supply, an acoustic signal sounds and the
humidifier is in a standby mode.
A1 Function Button – Active the humidifier with the first press. Select the amount of
vapour by pressing (3 levels). Hold the button down to turn the
humidifier off.
A2 Timer Button – Pres to set time of operation from 1 to 12 hours. The humidifier
automatically turns off when the time runs out.
Warning
– When there is insufficient amount of water in the tank,
E1
error message appears
on Display A3 .
– Acoustic signal sounds each time you press the button.
INSTRUCTIONS FOR USE
1. Place the humidifier on a suitable flat surface.
2. Remove the tank B from the humidifier A in accordance with Pic. 1.
3. Fill the tank B with water (at least 300 ml, ideally 1 – 4 l). You can place a suitable
aromatic additive in the vessel A6 .
4. Place the tank B on the humidifier A in a reverse way.
5. Connect the plug A8 to the power supply.
6. Turn the humidifier on by pressing the button A1 . After that, use the button A1 to set the
required level of produced water vapour and use the button A2 to set the timer.
7. You can turn the humidifier off any time during operation by holding down the button
A1
.
Notes
– Only add liquid aromatic additives to the vessel A6 (max. to 2/3 of its volume).
– The maximum volume (4 l) of the tank provides operation for about 13 hours.
I V. MAINTENANCE
Clean the surface of the appliance with a damp cloth. Rinse the vessel for aromatic additives
in warm water. Rinse the tank in warm soapy water. You may also use disinfectants but
always follow the instructions provided on the packaging. Clean the ultrasound converter
with a cloth (sponge) and warm soapy water.
15
GB
/ 31