eta 0608, Инструкция по эксплуатации, Страница: 12 / 32

– The power cord must not be damaged with sharp or hot objects, open fire, it must not be
sunk into water or bent over sharp edges.
– Avoid winding the power cord around the appliance, otherwise the power cord service life
would be reduced.
– If you need to use an extension cord for justified reasons, it must be undamaged and
comply with the applicable standards.
II. DESCRIPTION OF THE APPLIANCE (Fig. 1)
A – fan body
A
A1
A2
A3
A4
A5
1
A1 – motor unit
A2 – speed switch ( 0 / I / II )
A3 – blade
A4 – handle
A5 – feet
III . PREPARATION FOR USE
Remove all the packing material and take out the appliance. Remove all possible adhesion
foils, stick–on labels or paper from the appliance. Place the appliance on a suitable flat
and dry surface. Leave free space for due ventilation. Vents in the appliance ensure air
circulation during ventilation and they must not be covered or blocked in another way.
Make sure that the power cord is not damaged and that it does not lead any sharp or
hot surfaces. The electric socket must be easily accessible so that the appliance can be
easily disconnected from power supply if danger appears.Plug the power cord connector
to an electric socket. Moderate smoke for a short time does not mean any defect. Now the
appliance is ready for operation.
IV . INSTRUCTIONS FOR USE
Speed switch (A2)
„ 0 “ – Off
„ I “ – Low air flow velocity
„ II “ – High air flow velocity
V . TROUBLESHOOTING
The device is not working
– Check that the mains connection cable is firmly plugged in.
– Check the right function of outlet. Test outlet with other electrical appliances.
– Check the supply cord to ensure no damaged is evident.
GB
12 / 27