![background image](http://html1.mh-extra.com/html/eta/0596/0596_user-manual_2430247013.webp)
of top-quality stainless steel, but in common use, impurities from water get stuck
on them (water scale), particularly above the heating element.
It is not rust or
another material defect of the kettle container.
Cleaning the kettle
Use the water scale remover
ETA-AKTIV
which is available in the ETA sales network and
in shops with electrical appliances or you can apply the following procedure. Pour about
50 g citric acid to the kettle with the water scale sediment. Fill the kettle to about one half
and mix. After it dissolves, fill the kettle to 3/4 of the maximum amount of water. Place the
electric kettle on the stand and turn it on. Before boiling, turn off the kettle, let the solution
take effect for about 10 minutes and then pour it out.
Clean the kettle thoroughly with
clean water.
Repeat the whole procedure if the kettle is too soiled.
Clean the electric
kettle regularly!
Cleaning the sieve
(
A7
)
Take the sieve from the kettle. Clean it from possible sediments in running water using
a fine brush. Then put the sieve back in the opposite way.
V. ENVIRONMENT
Printed signs of materials used for manufacture, packing, components and accessories,
as well as their recycling, are on all the pieces if their dimensions enable it. The symbols
on the product or in the accompanying documentation mean that the used electric or
electronic products must not be disposed together with municipal wastes. Please, hand
them over to the collection points designed for their correct disposal, where they will be
accepted free of charge. By correct disposal of this product you can help to preserve
valuable natural resources and help to prevent possible negative impacts to the
environment and to human health, which could be the results of incorrect waste disposal.
For further details ask the municipal authorities or the nearest collecting point. Penalties
can be charged for incorrect disposal of such wastes, according to national regulations.
If the appliance is to be put out of operation definitely, we recommend cutting off the
feeder cable, to disable its use.
Expert service must do the large maintenance or to intervene into inside parts of the
appliance!
Non-observance of the instructions of the manufacturer cancels the right for
guarantee repair!
VI. TECHNICAL DATA
Voltage (V)
given on type label
Absorbed power (W)
given on type label
Max. volume (l)
1.7
Weight (kg) approximately
1.0
EC declaration on conformity was issued for the product.
Regarding EMC, the product conforms to the Council Directive No. 2004/108/EC as
amended and regarding the electric safety, the product conforms to the Council Directive
No. 2006/95/EC as amended.
13
GB
Содержание 0596
Страница 2: ...2 1...