eta 002899010, Инструкция по эксплуатации

Страница: 20 / 40

20 / 35
GB
undertake any responsibility arising from the warranty
on the appliance in case that the above safety
warnings are not followed.
II. DESCRIPTION OF (Fig. 1)
T – Knife sharpener
III. OPERATING INSTRUCTIONS
Remove all packaging material, take out the attachment.
Remove any adhesive films, stickers or paper from
the attachment.
Applicable to kitchen knives of
various materials universal stainless steel.
Assembly
The sharpener T and connect it to the head of the drive
unit according to Fig. 1. Proceed in the opposite order
to disassemble and remove the sharpener from the
head of the drive unit.
Use
The recommended using speed is MAX . Place the
blade of the knife (specifically the part nearest to the
handle) into the wheel by pressing lightly and gently
pulling the knife towards you (fig. 2) for approximately 3
or 7 seconds. Once you have performed this procedure
3 to 5 times, check that the knife has been sharpened
sufficiently. Please sharpen the knife according to
the shape of the blade, and don‘t use too much force
(ensure constant force and uniform speed). Repeat the
procedure until the knife has been sharpened to the
desired degree. Once you have finished, unplug the
appliance and clean knife in hot water with a detergent
right after use, rinse it in clean water and wipe till dry.
Attention
Read and follow the safety instructions in the
manual to the food processor or the meat
mincer.