eta 002895030, Инструкция по эксплуатации

Страница: 21 / 40

Put individual pieces into the filling opening M3 and lightly press it down using the pusher
M5 . This processing method prevents the drive unit from being overloaded. The chopped
food comes out of the output opening of the lid into the prepared bowl. After finishing
processing, turn off the appliance press by turning the dial to position 0 / OFF .
IV. TABLE FOR THE USAGE OF THE APPLIANCE AND ACCESSORIES
Please consider the following cooking tips as examples and as inspiration. Their purpose is
not to be a complete guide, but to demonstrate the possibilities of various food preparation
methods. Chose the amount of ingredients to be processed so that the maximum content
of the containers marked by a line is not exceeded. A larger amount of processed
ingredients must be divided into several batches and the contents of the container should
be regularly inspected. We recommend that you interrupt your work from time to time and
remove any food which has become stuck or clogged the attachment or is on the walls of
the containers, blender and lid.
Accessories Food Max. amount Time (min.) Speed Preparation
M6 Cucumbers 3 pieces 1 1 - 4 -
M7 Apples 1 000 g 1 1 - 4 1/2
M8 Cheeses 200 g 0:30 4 - MAX -
M9 Carrots 1000 g 1 4 - MAX -
M10 Potatoes 1 000 g 1 MAX 1/2
M11 Cabbage 1 000 g 1 3 - MAX 1/4
V. MAINTENANCE (fig. 5)
Pull out the power plug from the power socket before handling the device in any
way! Do not use abrasive and aggressive cleaning agents!
Slicer and including all accessories immediately after use in hot water with detergent.
Never immerse the gearbox assembly in water or allow it to get wet.
The plastic parts and cutting plates be washed in a dishwasher. Handle the cutting plates
with care – they are extremely sharp.
Take care that the binding surfaces and the sealing elements are functional.
Some foods may stain the accessories in a certain way. This however has no effect on
the operation of the appliance and is not cause for a claim or complaint regarding the
appliance! After some time this staining usually goes away by itself. Never dry plastic
moulded parts above a heat source (e.g. fire stove, electric/gas stove ). Store the
appliance thoroughly cleaned in a dry, dust-free location that is out of reach of children and
incapacitated persons.
VI. ENVIRONMENT
If the dimensions allow, there are marks of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specifi ed on
the product or in the accompanying documentation mean that the used electrical or electronic
products must not be disposed of together with municipal waste. For proper disposal,
hand them over at the special collection places where they will be accepted free of charge.
GB
21 / 34