Et ETD-SB-HL3205, Руководство пользователя

Страница: 10 / 22

Attaching Back Support Brackets to Legs
Grab (2) of the long flat brackets, (4) long screws and (4) washers. Similar to how the legs
support brackets are attached, the same will be done with the back brackets, connecting the
two sets of legs together.
When attached correctly, the brackets will cross over each other forming an “X” shape on the
back side. Again, make sure that the screws are not too tight, as you may need to adjust the
placement of the brackets and level the rack. Be sure to line up the bracket holes with the
threaded insert holes, similar to what was done with the legs.