7
ENGLISH
INSTALLATION INSTRUCTIONS
Mounting location
First, find a suitable mounting location for the device. Make sure that the device has enough
space for installation. The installation dimensions can be found in the “DIMENSIONS” section.
In order to avoid malfunctions, never mount the device near the motor.
Mounting opening
After finding a mounting location, you need to cut a circular hole with a diameter of approx. 51
mm.
Interconnection
Connect the device as described under “CONNECTION DIAGRAM” in the owner’s manual of the
Media Receiver VRM301. Then slide the device and the wiring through the hole.
Functional test
Before you complete the installation, you should carry out a function test.
Fastening
The device must now be fastened with the enclosed fixing screws and the mounting bracket.
Please note the following steps when installing the device:
1
2
3
4
5
The mounting bracket must be
pressed from the inside against
the baffle of the mounting location
in order to fix the device.
When mounting, make sure that
the device lies flat on the mount-
ing surface,
Use the two enclosed nuts to fas-
ten the device.
Make sure that the wiring harness
and the connection cables are not
kinked or crushed during assem-
bly.
If the mounting bracket is too
long, you can shorten the length
accordingly on both sides at the
breaklines.
Breaklines
