16
INSTALLATION INSTRUCTIONS
MECHANICAL INSTALLATION
Before you start with the installation of the sound system, disconnect necessarily the GROUND connection
wire from the battery to avoid any risk of electric shocks and short circuits.
Avoid any damages on the components of the vehicle like air bags, cables, board computer, seat belts, gas tank or the like.
Ensure that the chosen location provides a sufficient air circulation for the amplifier. Do not mount the device into small or
sealed spaces without air circulation near by heat dispersing parts or electrical parts of the vehicle.
Do not mount the amplifier on top of a subwoofer box or any other vibrating parts, whereby parts could loosen inside.
The wires of the power supply and the audio signal cables must be as short as possible to avoid losses and interferences.
NOTE
4 x
4 x
4 x
4 x
1
3
2
4
At first you need to find a suitable installation loca-
tion for the amplifier. Ensure that enough space for
the installation of the cables remains and that they
will not be bent and have sufficient pull relief.
Drill
Mounting hole
Mounting hole
Marking
Pen or
marking
tool
Fixing
screw
Lay the amplifier aside and then drill the holes for
the mounting screws at the marked locations.
Please ensure not to damage any components of
the vehicle while you drilling the holes. Alterna-
tively (depends on the material of the surface) you
can also use self-tapping screws.
Keep the amplifier at the chosen mounting location
in the vehicle. Then mark the four drill holes with
an appropriate pen or marking tool through the
designated mounting holes at the amplifier.
Then uphold the amplifier to the chosen position
and fix the screws through the mounting holes into
the drilled screw holes.
Ensure that the mounted amplifier is tightly fixed
and can not come loose while driving.
Содержание QS-TWO
Страница 2: ...2...