ESWOOD OPERATING MANUAL CI-3B June 2011
9
W
ASHING OPERATION
6
1.
Check the level of detergent and fill when necessary with
undiluted detergent.
2.
Turn the power on and the red “Machine On” pilot light will
illuminate. It will take about 10-15 minutes for initial heating of
water in the rinse cylinder.
3.
Open the door, slide the rack in and close the door.
4.
When the “READY 82
O
C” red pilot light is on, push the Red
button for a Hot cycle or Blue for a hot cycle followed by a
Cooling cycle. While the machine is running the amber
“CYCLE” light is illuminated. (refer figure 2.)
5. Occasionally check that the drain outlet is free from debris such
as paper, toothpicks and sliced fruit.
FIGURE 2.
RED BUTTON
ORANGE LIGHT
TOGGLE SWITCH
BLUE BUTTON
RED LIGHT
RED LIGHT
