Eswing ES6 Comfort, Руководство пользователя, Страница: 22 / 27

6. Maintenance 6. Maintenance
6.1 Clean and Storage
In order to keep ES6 in the best performance please clean your
ES6 after use.You can use the soft cloth dipped in a small
amount of water to clean ES6. Glasses wiper cloth is
recommended. ES6 can be washed by household shower hose
or garden hose (water pressure is less than 1MPa, or 145PSI)
to flush tyres and fenders. Please dry it as soon as possible
after hosing and place ES6 in a ventilated condition to avoid the
iron parts rusted. If it is difficult to clean some stains on the
plastic surface, toothpaste can be used, using the toothbrush
repeatedly scrub, and then use the wet cloth to clean.This
method can also be used to clear the surface scratch.
When not in use, place ES6 in dry and cool place indoor, and avoid to store ES6 outside for long time.
Sun exposure and extreme hot / cold outdoor environment will accelerate ES6 aging.
When clean ES6, make sure it is turned off, the charging cable is unplug and the charging port is shut! Otherwise electric shock or
6.2 battery maintenance and transportation
Battery pack is the component needs to pay most attention on the maintenance. Battery may still performance well after 20,000~30,000km
mileage under good maintenance; and failure maintenance will reduce the capacity or damage the battery after few months.
To try to extend the battery life, please follow the following tips for regular inspection and maintenance:
1. Please read the notes on the battery pack surface and follow the instruction.
2. Please keep the battery pack in the dry environment at temperature from 0 to 40C. Extreme high or low temperature can affect battery life.
Please avoid storing or using the battery in the environment below -20 or above 50 .
3. Please keep the battery pack in dry and cool environment. In the extreme moist environment, the battery internal condensation probably
causes the battery damaged quickly. If the wet environment cannot be avoided, please use the large bag will seal to storage battery.
4. In daily use, please avoid the battery completely exhausted and then charged. If the power is only 1~2 grids, please charge as soon as
possible.After use, please fully charge the battery. Frequent charging does not affects the battery life, and long time exhausted status will
reduce capacity and life of the battery.
5 if the battery is installed on the ES6, the battery will continue to consume.Thus:
a) For a short time storage (less than 30 days), or less than 30 days of transport time, the battery should be fully charged.
b) For long time storage (more than 30 days), or transport time for more than 30 days, the battery should be fully charged, and then removed
from ES6, stored in a cool dry place.
WARNING
serious damage may happen. High pressure hosing or soaking in water are strictly prohibited in scooter cleaning which may lead
to water damage of internal parts and components.
c) For a long time (more than 180 days), please recharge the battery every 3 to 4 months to maintain the battery capacity and life.
WARNING
Do not use alcohol, gasoline, kerosene, acetone or other corrosive, volatile chemical solvents to clean ES6.
These substances will damage the appearance and internal structure of the ES6.
WARNING
When battery pack is fully charged and installed in ES6, even if the scooter is not in use, there will be a small consumption of power.
In a typical case, the consumption is about 30% of its capacity for around 90~100 days standby. In the different temperature
and environment, the battery internal chemical material will gradually lose the activity, regular charge and discharge is necessary.
38 39