Estun E200PS, Руководство по эксплуатации

Страница: 18 / 21

E200PS Operation Manual
16
Appendix B Alarm List
Alarm NO. Alarm Information Alarm Description
A.01 Pieces reached
Normal message, that the count reaches a preset
value.
A.02 XPos < minimum
The current position of X-axis is out of the minimum
value, it is necessary to move the X-axis to the soft
limit range manually.
A.03 XPos > maximum
The current position of X-axis is out of the maximum
value, it is necessary to move the X-axis to the soft
limit range manually.
A.04 GPos < minimum
The current position of G-axis is out of the minimum
value, it is necessary to move the G-axis to the soft
limit range manually.
A.05 GPos > maximum
The current position of G-axis is out of the maximum
value, it is necessary to move the G-axis to the soft
limit range manually.
A.06 Out of UDP Move the cutter to the upper dead point by foot witch.
A.08 X Out of limt.
When the X-axis is employed for the front feed, The
current position of X-axis is out of the soft limit range,
it is necessary to move the X-axis to the soft limit
range manually.
A.11 Slider Block err.
The slider is not on the TDC in the case of positioning.
Move the cutter to the upper dead point by foot witch.
A.12 Finished work
The count reaches the preset value, need to manually
clear alarm.
A.22 Mach. Not ready Need to start the pump power.
A.23 Encoder abnor. The voltage of encoder is abnormal, please check it.
A.24 Comm. Err.
Can communication is abnormal, please check
whether the communication port ground is well.
A.25 X-axis Dropped
The X-axis driver is missing, need to power on system
and drive again.
A.27 Can Send Err.
The device is not connected to the drive, please
connect the drive.
A.29 SafeIn Err.
Light signal loss on the CUT stage, check the screen
input signal with or without object light signal.
A.30 Power Drop
The system voltage is lower than the normal value,
check whether the system voltage is normal.
AX.60~AX.67 CAN Error
The X-axis CAN communication is abnormal,
restarting the system after clearing the alarm.