Estun E200P, Руководство по эксплуатации

Страница: 3 / 25

E200P Operation Manual
1
Preface
Synopsis
This document guides the operator how to operate the E200P press break
numerical control device.
 Chapter 1 describes panel and page.
 Chapter 2 describes the example operation of the Single-Step and Mutil-Step.
 Chapter 3 describes the operation guide of the pages.
Intended Audience
This document is intended for the authorized and properly trained persons:
 Device manufacturer: In the device production process, the people who diagnose
the device have the highest managing privileges.
 System integrators: usually refers to the technical personnel of machine tool
manufacturers, who can configure the machine parameters to commissioning the
system.
 Operator: use the machine to do the programming work, set the programming
constant parameters.
Attention
 Copy right is preserved by ESTUN. Do not add or delete part or all of the manual
content without ESTUN’s consent. Do not use part or all of manual content for the
third party’s design.
 E200P device provides complete software control and has no mechanical
protection device for operator or the tool machine. Therefore, in case of malfunction,
machine tool must provide protection device for operator and external part of the
machine tool. ESTUN is not responsible for any direct or indirect losses caused by
normal or abnormal operation of the device.
 ESTUN preserves the right to modifying this manual in the event of function adding
or print error.
 E200P device has the light protection function, but only works on the CLOSED
stage, it is unavailable on others stage.