Accessories
1 x Bluetooth speaker, 1 x Micro USB-cable, 1x remote control, 1 x User manual
Compatibility
This product is compatible with Bluetooth enabled mobile phones and devices.
Charge
1. Connect speaker with PC/Laptop/Mac or any 5V USB adapter (not included) by the USB cable included.
2. Red LED turns ON during charging, turns OFF after fully charged.
3. Unplug USB cable after fully charged.
4. Red LED twinkles when low power (<21%), with a warning sound.
Turning ON/OFF
Hold the power button for approx. 2 seconds to turn on, you would hear a starting chime.
Hold it again for approx. 2 seconds to turn off.
Pairing
1. Turn on the speaker to be ready for pairing. After 3-4 seconds, you would hear a chimed Bluetooth sound.
2. Activate the Bluetooth function on your mobile phone or any Bluetooth devices, search the speaker and select the
name “GlowSound1”, and connect the speaker with the device via Bluetooth pairing
3. The Bluetooth sound is chimed once more after paired.
Note:
1. Keep the range of 1 meter when pairing. If the pairing was not successful, turn off the speaker and re-pair again.
2. After successful pairing, paired devices will remember each other so there is no need to pair again unless pairing
information is deleted.
3. To pair with a new device, follow steps 1-3 above after disconnected from existing device.
TWS (True Wireless Stereo) Function: to pair one mobile phone with 2 speakers together
1. Make sure you have 2 GlowSound1 speakers at your hand, turn on both speakers together, then quickly double
click “Power” button s of both speakers, both speakers will into pairing mode to pair with each other first.
2. Wait for around 5-10 seconds until two speakers “beep” once in sequence, which means both speakers paired with
each other already.
3. Then, activate Bluetooth function of your device and pair with Bluetooth name GlowSound1. You would enjoy
music in True Wireless Stereo sound from two speakers simultaneously.
Warm notes:
1. You can only enjoy TWS function when you have 2 ES652800 speakers.
2. If you want to disconnect existing TWS connection, double click “Power” button of either speaker, the sub-speaker
will disconnect, the host speaker will keep playing music.
3. If you want to establish TWS connection with 2
nd
speaker after your device connected with one speaker already,
please long press” power “button to disconnect from your existing paired device, then follow above steps 1-3.
Operation by remote control
(please remove the plastic tab from the battery cover before use).
1.
Standby
: press to into/out of Standby mode after powering on the speaker.
2.Change brightness.
3.Switch on/off the light
.
4. Switch to Bluetooth mode.
5. Go to selected single color directly.
6. Repeatedly press it to change colors in a loop.
7.
Switch light to Flash mode(Beats to music)
.
8.
Switch
light to Smooth mode(Breathing light slowly change colors)
9. Switch to white color directly.
10. Go to previous/next track (not workable under AUX mode).
13. Play and Pause.
14.
Voice - and +
15. Switch to AUX or USB-play mode.
