Esterline BT 304, Руководство по сборке

Страница: 4 / 17

4 SOURIAU 2013 ©
UTS LC Series
|
BT304
Tool & Material
The following tools and materials are necessary for preparation, assembly, inspection, and maintenance of the
connector and cable assembly. Follow the tool instruction for operation and safety guidelines.
TOOLS
- Cable jacket strip tool
- Aramid Fiber Shears
- Fiber Stripping Tool
- 15 mm U–wrench
- 28 mm U–wrench
- 36.5 mm U–wrench
- Nipper (Oeticker Standard pincers with straight jaws 14100082)
- Heat gun (optional)
MATERIAL
- LC contact: the UTS LC connector range can adapt all kind of LC contact as defined per IEC 61754-20
- Cable: the UTS LC connector range can adapt all type of standard cable from 3 to 6mm outer diameter.
Above these diameter limits some adaptations are necessary
- Suggested glue: LOCTITE
®
480 PRISM Instant Adhesive
ASSEMBLY INSTRUCTIONS
The assembly should be done in a dust free and dried environment, in accordance with fiber optics good practices.
Make sure that all components are free from contamination.
The assembly instruction is only a guideline and the assembly/manipulations are under the responsibility of the
assembler. Any change of product or material is under the responsibility of the assembler.