22
ii)
Keep holding the isolation foot and unscrew the spike till it
reaches the right length and touches the floor/floor plate.
iii)
While firmly holding the spike in the adjusted height position,
tighten the locking ring until the spike is firmly and securely
seated.
i)
ii) iii)
Proper use of the isolation feet and spikes/floor plates will
achieve accurate audio reproduction with fast and deep bass, focused
imaging, and avoiding colouration in the midrange frequencies.
4.3. Wiring
When connecting the speaker to the amplifier please make
sure that the amplifier is in the off position. Connect the speaker cable
to the pole terminal on the back of the speaker: speaker terminal „+“
with the amplifier terminal „+“ and „–“ with „–“. For signal flow, please
follow the direction marked on the cable or in the cable
manufacturer’s instruction. Typically, the signal flow is in the same
direction as the labelling/writing on the cable.
