ESTELLE ESBDYSLIMDA, Руководство пользователя

Страница: 9 / 16

Electronic muscle stimulation (EMS)
1. Clean grime, grease, and makeup with a damp towel from the body parts which
are to be massaged.
2. Connect the lead fastener with the electrodes. Place the positive and negative
poles of the electrodes on different parts of the body. One positive and one
negative electrode are to be used at a time. Do not use a single electrode.
3. Adhere the sticky electrode pads to the points to be massaged. Refer to the
acupoint indications featured later in this guide for recommended placement.
4. Plug in the device.
5. Press Power button to turn the unit on.
6. Select the desired mode of massage from EMS, TAPPING, MASSAGE, KNEADING,
SCRAPPING and SLIMMING.
7. Adjust the intensity from 1-5 relative to your desired comfort level.
8. The unit will stop working automatically after 10 minutes. If you want to repeat the
procedure, turn the device on again and repeat It.
Select the required mode Adjust the intensity
Tip:
It is recommended to use the device for 15 minutes at first and increase the time of
application to 30 minutes after repeated use.