5
OPERATION
1 . Position the grater with the switch (3 in figure 1) in front of the operator. Make sure
that the power supply voltage corresponds to the figure indicated on the serial plate.
2 . Insert the plug into the outlet, place the product to be grated into the grater mouth
(2 in figure 1), close the pressure handle (1 in figure 1) and press the green ON button
to turn the machine on .
NOTE: The pressure handle is equipped with a micro switch which stops the machine
when the lever is opened. Closing the lever resumes operation automatically without
having to press the switch again.
3 . Do not operate the grater when it is empty .
4 . To prevent motor overheating, do not operate the machine for more than 15 minutes
at a time .
5 . Press the handle gently and uniformly for the best results.
6 . Press the red OFF button to stop processing
CLEANING
NOTE – Please unplug the unit before cleaning
• Use a hard-bristled brush to remove any cheese from the roller teeth
• Peel off all the excess cheese with scrapers
• Use a clean cloth with hot water mixed with neutral soap to clean any parts that come
in contact with food. (i.e. pressure handle, grater mouth and grater roll)
