APPENDIX G
QUICK START GUIDE
Revised: 14 Jun 06
APX G-10
EST P/N AA107G
10.
Configure the repeater peer list by selecting Enable the repeater capability radial to YES (Above). Press the
Add
button to the
right of the repeater peer table and, using the chart created in the
Begin Programming
section of this guide, enter the
Wireless MAC (WLAN MAC) address of the opposite 195Ep (the 195Ep this unit you are programming will communicate
with) in the Peer 1 – MAC Addr field (right). Leave the Priority and Cost settings at the default values and change the Enable
Link radial to Enable and press the
Create Repeater Peer
button. Press the
Next
button.
11.
Press the
Commit Changes
button and the modem will save all the changes made and reboot. The reboot time is
approximately 1 minute to be ready for operation.
12.
Complete all steps in this
Setup Programming
section for the other Model 195Ep’s you will be testing before moving on the
Testing Communication section.
Example Addresses
Name
Serial Number
IP Address
Ethernet MAC
WLAN MAC
195Ep We Are
Programming
E-14096
172.16.48.189 00:04:3f:00:01:01
00:04:3f:00:01:02
Opposite 195Ep We
Will Create Wireless
Link
E-14034
172.16.38.114 00:04:3F:00:0B:00
00:04:3F:00:11:02
Step 10 – Configure Peer Table
