APPENDIX G
QUICK START GUIDE
Revised: 16 Jun 06
APX G-1
EST P/N AA107P
Before You Begin
•
The ESTeem Model 195Ep wireless Ethernet radio modem is compatible with many different applications. The most
common application is to bridge two or more Ethernet devices or networks. This guide will demonstrate the basic
configuration and testing of a pair of 195Ep’s. For a more detailed information, please see the ESTeem Model 195Ep User’s
Manual.
•
This guide assumes you have a working knowledge of Ethernet networking, TCP/IP protocol and how to identify and set the
TCP/IP address on your computer.
•
The 195Ep can be configured using any current web browser software such as Internet Explorer, Netscape or Mozilla.
•
The following procedure will provide an initial communication link between two or more Model 195’s for testing purposes.
All the example commands listed in this guide can be adjusted to fit your communication network. Please consult the
ESTeem Model 195Ep User’s Manual for more details.
Unpack Contents
Each node in your ESTeem Model 195Ep’s network may have different hardware components based upon the final installation
location (i.e Outdoor, Indoor, Point-to-point or Muti-Point). Antenna types, cable lengths, power supplies may be different, but
the following items will be required for basic setup:
Model 195Ep
AA109 Resource Disk
Antenna
(AA20DMEp
Displayed)
(2) Ethernet Cables
Power Supply
(AA174 Displayed)
Note: Your accessory model numbers may vary from the above, but you will need to locate each of above items to continue
configuration.
