ESTechnical Reflow Oven Controller Full Upgrade Kit for T962A
49 of 50
What you will need (not supplied):
Screwdrivers
Multi-meter (ideally with 250v insulation resistance test mode)
Allen keys
Wire cutters
Wire strippers
Crimp pliers
Small pliers to help grip the nut when fitting the Solid State Relays (SSRs)
Electric drill
Various sizes of drill; 2mm and larger suitable for drilling steel
Sharp pencil for marking panel
Center punch and hammer (for marking where to drill)
Metalwork files
A container for screws
Soldering iron
Solder
Hot glue gun and glue sticks
Hot air gun or other suitable tool for shrinking heat-shrink sleeve
EC Declaration of Conformity
In accordance with EN ISO 17050-1:2004
We, ESTechnical
of
12 Ormonde Road,
Folkestone,
Kent,
CT20 1PG,
United Kingdom
in accordance with the following Directive(s):
2004/108/EEC The Electromagnetic Compatibility Directive
2011/65/EU
ROHS 2
hereby declare that:
Equipment:
ESTechnical Reflow Oven Controller
when installed and operated as per the supplied instructions the equipment
named above complies with all applicable Essential Requirements of the
Directives.
Signed by: Ed Simmons
