Esteam e1200, Руководство пользователя

Страница: 23 / 32

22
(ii) Any claim for warranty must be presented to Esteam or its authorized dealer,
prior to the expiration of the time limitations specified and not thereafter,
otherwise any warranty is void.
(iii) Notwithstanding the generality of the foregoing customer obligations, Esteam
does hereby bring to the attention of the customer, these specific maintenance
operating requirements of the E1200 Extractor to validate its warranty:
(a) Chemical Warning:
Any improper use of chemicals shall void any Esteam warranty and
thusly exclude any liability by Esteam. No dry cleaning chemical may
be used in a E1200 Extractor; - as any such use may result in fire or
pump/motor damage. A defoamer solution must be used bycustomer
to limit foaming in the recovery tank.
(b) Vacuum Motors:
Require use of a defoamer. A vacuum motor showing moisture
contamination on interior components shall void any warranty by
Esteam.
(c) Pumps:
All pumps require daily flushing with clean water after use.
Further on the 1000 PSI Pumptec pump, a 20 AMP fuse is used to
protect this motor; and the pressure regulator must not be tampered
with to exceed a higher operating pressure than the 1000 PSI
maximum allowed.
The foregoing constitutes Esteam's entire warranty and no other warranty, liability,
contingency or responsibility, direct, indirect, consequential or in any other way
connected with the sale or operation of Esteam machines or chemical product is
expressed or implied.
E1200 Extractor Warranty
Esteam Manufacturing Ltd. 3750-19th Street NE
Calgary, AB T2E 6V2 1-800-653-8338