Estar AIR TRACTOR AT-802, Инструкция по эксплуатации

Страница: 2 / 10

TAIL CONSTRUCTION
1. Lay waxed paper or PVC film over the plan.
Pin the vertical fin (V1-V6) and rudder parts (R1-R9).
Glue the parts with thin CA.
2. Pin the horizontal stabilizer (S1-S5) and elevator parts
(E1-E5) on the plan. Glue the parts with thin CA
3. Remove tail from the plan and apply thick CA glue at
each joints for reinforcing and Carefully sand surfaces.
WING CONSTRUCTION
1. Pin the parts(W1-W7) on the plan and glue together
with thin CA.
2. Assemble spars(W8, W9), trailing edge(W10), wing
joiners(W11-W13) and ribs(W14-W16).
3. Assemble ribs(W16-W17) and then glue together with
thin CA. ). Apply thick CA glue at each joints for
reinforcing.
4. Glue leading edge(W18) and trailing upper sheet(W19).
5. Glue upper sheets and cap strips(W19-W22) with thick CA .
6. Glue leading edge(W23).
7. Glue wingtip trailing edge(W26).
8. Glue wingtip. (W24, W25).
9. Glue plywood servo trays(W28, W29).
10. Prepare aileron and flap parts(A1, A4, P1, P5) and sand
trailing edges.
Page 2