Estar AIR TRACTOR AT-802, Инструкция по эксплуатации

Страница: 1 / 10

AIR TRACTOR AT-802
INSTRUCTIONS www.estarmodels.com
KIT INCLUDES ITEMS NEEDED TO COMPLETE
Full size plan.
Lasercut parts.
1.5mm(1/16”)xL580mm(23”) balsa : 2sheets
1.5mm(1/16”)xL465mm(18.5”) balsa : 7sheets
1.5mm(1/16”)xL350mm(14”) balsa : 2sheets
3.0mm(1/8”)xL580mm(23”) balsa : 2sheets
3.0mm(1/8”)xL465mm(18.5”) balsa : 1sheet
3.0mm(1/8”)xL350mm(14”) balsa : 2sheets
4.0mm(5/32”)xL465mm(18.5”) balsa : 2sheets
5.0mm(3/16”) Stick(W23) : 2ea
5.0mm(3/16”) xL330mm(13.2”) balsa : 1sheet
1.8mm(5/64”)xL400mm(16”) plywood : 1sheet
3.0mm(1/8”)xL600mm(24”) plywood : 1sheet
3.0mm(1/8”)xL300mm(12”) plywood : 1sheet
Vacuum formed Cowl and Canopy.
Motor mount 10x10x90mm.
Landing gears(2ea), Silicon tubes(4ea) and Tail gear.
2mm bolts and nuts(6sets), 2mm screws(8ea).
3mm Wing screws (4ea).
Neodymium Manetics (4ea)
CA hinge.
Pushrods(6ea) for Rudder, Elevator, Ailerons and flaps.
Instructions and Stickers.
GWS EPS-400C-DS(3:1) or
BL motor (5~6:1 geared, 12~15A:
Himax 2025 kv4200, Feigao 13084-
13L kv4462, Hyperion HP-X22L-
3900 recommended).
ESC (15~25A).
Propeller 9070 (2-blades or 3-
blades) or APC 9x6E.
Li-Poly 11.1V 1700~1800mAh
Battery w/Li-Poly charger.
Mini Receiver(5-7 channel).
6 submicro Servos
(Hitec HS-55 / Futaba S3108 /
GWS pico servos, or
equivalant)
Servo extension cords and Y-
harness.
2~3 rolls of covering film.
(Solite/Monokote/Oracover)
50mm(2”) Wheels, Wheel
Collars (4ea) and Rod
adjusters (6ea).
Page 1