4
•
When wet, a sound may come from the brake pads, this is normal and will go away once dry.
•
If you are not familiar with bicycle gears. DO NOT adjust the knobs (rotatable gear adjusters, one next to the rear derailleur and the
other one near the shifters) on the gear cable. These knobs are there to adjust the gears when needed and turning them when gears are
working fine will disrupt the original settings and misalign the gears.
Step 03:
TURNING ON AND OFF
1. Turn on the power on the battery. Activate the battery by pushing the power button on its body for 4 seconds. The LED lights will turn on and
indicate the battery capacity.
2. Turn on the display panel of the e-bike. Press the on/off button on the display.
To turn off press the power button on the display and then turn off the frame battery by holding the button on the battery for 4 seconds.
Note:
eStallion bicycles are delivered with a fully charged battery. Therefore, you can start riding the bicycle straight away.
MAINTENANCE
Electrical components of eStallion does not require servicing. Normal bicycle parts should be serviced regularly just like a normal bicycle. (A
general service is recommended every 3 months or around 1000 km). kinds of conditions you're riding in. Heavy use, rough terrains, rain, mud
and dust all mean more frequent servicing.
Bicycle care tips:
Keep your bike inside as much as possible; avoid storing it outside. Rain, moisture, and dirt cause your parts to wear quicker and may cause rust
on steel parts.
eStallion is water resistant. However, it is not safe or recommended to ride on wet/slippery roads. Bicycles ridden in rain and/or off-road require
more frequent and extensive service. If you are a frequent commuter or distance rider, and has to ride in the rain, it is best to wipe down the
bicycle (specially the controller display and the battery area) afterwards and make sure water is not collected on the bicycle for longer durations.
It is best to cover the controller display using a waterproof material if regular exposure to water is expected.
Use a lubricant on the chain. Try to find a chain lube specially developed for bicycle chains. We do not recommend using WD40 on your chain
since it is made for doors and things that move sometimes, not bikes - which have lots of pressure and movement. WD40 could actually strip
your chain of oil, causing metal-on-metal grinding.
Be Sure Bolts, Screws, and Nuts are Tightened. Try and check them regularly and before every ride.
If your bike has been crashed, we recommend bringing it in for a thorough check-up to ensure that it is functioning properly and safely.
eSTALLION COMMUNITY
There is a WhatsApp group that includes eStallion users and Stallion Riders team members where you can discuss and get up to date information
on your eStallion bicycle. You can join the group by scanning the following QR or by clicking on the link. We always encourage the
constructive feedback from the users of our products in order to improve.
WhatsApp Group Link: https://chat.whatsapp.com/LcvQTNb9qCkGnuv5bFt41T
WhatsApp Group QR:
If you’re happy with our bicycle, please leave us a good review on our social media or on google through the following links
FB:
https://www.facebook.com/Stallionridersbikes/reviews/
Google review:
https://goo.gl/maps/asxpofGZuDH3s9st6
