Established & Sons SURFACE TABLE Скачать руководство пользователя

Страница: 5 / 6

Insert part C into the end of part F and tighten by turning in a clockwise direction

using a 6mm allen key. Insert Part D into the top to finish. Repeat steps 1 - 4 for the

remaining 3 legs.
Carefully lift the assembled table and turn the right way up. Gently lower to the floor.

Fit part E over the parts already in place. Tighten by turning in a clockwise direction using

a 12mm spanner.
Slide part F over part E

Содержание SURFACE TABLE

Страница 1: ...erence Woodgate John Bernard ESTABLISHED SONS United Kingdom Phone 44 0 20 7608 0990 establishedandsons com ESTANDSONS LTD Estandsons Warehouse Intereuropa d d Mednarodni prehod 8 SI 5290 Šempeter pri Gorici Slovenija ...

Страница 4: ...n blanket is laid on the floor to prevent damage to the surface of the table top Carefully uncrate and place in the prepared area with the bottom of the table facing up Screw part A in a clockwise direction into the corner fitting Slide part B over part A in the orientation shown ...

Страница 5: ...en key Insert Part D into the top to finish Repeat steps 1 4 for the remaining 3 legs Carefully lift the assembled table and turn the right way up Gently lower to the floor Fit part E over the parts already in place Tighten by turning in a clockwise direction using a 12mm spanner Slide part F over part E ...