6/
Move the 2nd drawer from the bottom of the Stack
to one side to gain access to the lower drawer. You
will see 4 white screw caps on each side. Remove the
2 screw caps nearest the front of the drawer from both
sides. This will expose the screws which raise and lower
the castor wheels, enabling the stack to move. Repeat
procedure on opposite side.
4/
With 2 people positioned at the base and 1 supporting
the top of the piece to prevent tipping, carefully lift
from underneath the bottom white drawer panels. The
remaining person should quickly remove the base of the
crate from underneath before gently lowering to the floor.
Note: DO NOT use coloured panels to lift the piece.
DO NOT lift more than a 5cm, particularly the 13
drawer. As this is a heavy item, there is a risk of injury if
handled incorrectly.
3/
Remove polystrene boards that are used to protect
the piece within the crate. DO NOT remove the remaining
shrink & bubble wrap packaging until in position on the
floor. This will help to keep the drawers secure when
handling.
5/
Carefully remove remaining packaging foam & bubble
wrap. DO NOT use a knife to open as this could scratch
the drawers beneath the packaging. Open with care.
Remove the lid of the top drawer and place away from
the piece in a safe place. Remove the internal polystyrene
which prevents the drawers from moving by pulling the tab
up. Replace the lid.
Содержание STACK
Страница 1: ...STACK Shay Alkalay ...
