Established & Sons STACK Raw Edges Скачать руководство пользователя

Страница: 4 / 8

1. Unpacking should be carried out near to its final location.

Ensure enough space is cleared in advance.

Carefully unscrew the crate fully (A).

Remove all panels & place away from the unpacking area.

2. Remove polystyrene boards that are used to protect the piece within the crate (B).

WARNING! DO NOT remove the remaining shrink & bubble wrap packaging until

in position on the floor. This will help keep the drawers secure when handling.

Содержание STACK Raw Edges

Страница 1: ...w Edges Shay Alkalay ESTABLISHED SONS United Kingdom Phone 44 0 20 7608 0990 establishedandsons com ESTANDSONS LTD Estandsons Warehouse Intereuropa d d Mednarodni prehod 8 SI 5290 Šempeter pri Gorici Slovenija ...

Страница 4: ... unscrew the crate fully A Remove all panels place away from the unpacking area A 2 Remove polystyrene boards that are used to protect the piece within the crate B WARNING DO NOT remove the remaining shrink bubble wrap packaging until in position on the floor This will help keep the drawers secure when handling B ...

Страница 5: ...y remove the base of the crate from underneath D WARNING DO NOT lift from the side coloured panels E WARNING HEAVY ITEM there is a risk of injury if handled incorrectly C D E 4 Carefully remove remaining packaging foam bubble wrap DO NOT use a knife open with care Remove the lid of the top drawer F Remove the internal polystyrene by pulling the tab up G Replace the lid F G ...

Страница 6: ...site side H I 6 Using a flat head screwdriver turn CLOCKWISE to lower the castor wheels J Turn each wheel the same number of turns to ensure stability NOTE Only extend enough to allow the unit to move freely on the floor DO NOT extend the castors fully as they will leave their housing The screwdriver must be large enough to drive in an M10 screw J ...