Esta 60.000 Скачать руководство пользователя

Страница: 29 / 36

Maintenance &

troubleshooting

60000-52-03

DDE 1500

7.9 Rectifying faults

DANGER

Electric shock from high voltages



Any work on the electrical grid and on live components parts may only be

performed by an electrician.

CAUTION

Damage from dust leaks and dust trails at air outlet openings.



Turn the product off at the main switch immediately.

CAUTION

Danger from the fan producing smoke and loud running noises



Turn the product off at the main switch immediately.

CAUTION

Damage due to dust release



Maintenance, cleaning, repair and emptying work may be done only by

expert personnel.



Wear personal protective equipment.

Respirator mask (particle filter class P3)

Protective clothing

Protective gloves

Eye protection



Set up locally filtered forced-air ventilation where the product is being

maintained, inspected or cleaned.

Fault

Possible cause

Possible solution

Suction too weak

Filter soiled.

Clean filter.

Throttle is shut too firmly.

Open throttle accordingly.

Clog due to deposited
residue in the suction pipe
system

Check the suction pipe
system for deposited residue
and clogs, and clean it if
necessary.

Suction power of the
product declines and
does not improve
after cleaning.

Filter worn.

Perform filter change.

Collection drawer full.

Replace disposal carton;
empty collection drawer if
necessary.

The resistances in the
suction system are too high.

Check suction pipe; if
necessary, use pipeline with
larger diameter or reduce
length of pipeline.

Motor protection
trips.

Motor was switched on/off
too often
within a short period of time

Please consult the "Activation
operations for motors" table.

Содержание 60.000





































Результаты поиска

Содержание 60.000

Отзывы:

Похожие инструкции для 60.000

Бренды по названию

Популярные бренды

Esta 60.000, Руководство по установке

Результаты поиска

Содержание 60.000

Отзывы:

Похожие инструкции для 60.000

Бренды по названию

Популярные бренды