EST 270219 R1, Руководство по установке

Страница: 9 / 24

ATPC Manual 3
Specifications For Dukane Model 1B3250
Maximum quantity per channel 25
Rated output power 250 Watts (180 Watts Nominal)
Max. signal input 1 VRMS
Input impedance 75K Ohms
Output impedance 8 Ohms
Primary power 120 VAC, 60 Hz
Battery power 24 VDC
AC power consumption:
Standby
Full
load
48 Watts
700 Watts
DC power consumption:
Standby
Full
Load
0 Watts when using the ATP
20 Amps
Dimensions (HWD - inches) 8.5 x 19 x 15
Weight 55 lbs.
The output of the amplifier must be set for the proper value by
adjusting the INPUT LEVEL adjustment on the back of the amplifier.
With the Pre-amp riser loaded in the final system configuration and the
appropriate terminator installed, the amplifier must be adjusted for 25
VRMS output. This setup must be done while the 1 kHz tone is being
generated by the FCCA. The installer making this adjustment must
have a meter that reads RMS voltage.
firealarmresources.com