Essilor Pro-B 300, Руководство пользователя

Страница: 21 / 140

3. Type of tracing
◦ Symmetric binocular tracing
&
◦ Asymmetric binocular tracing
&
◦ Right-eye monocular tracing
◦ Left-eye monocular tracing
4. Type of optical tracing
◦ Demo lens/recut lens for Nylor frame
©
◦ Demo lens / Recut lens
◦ Pattern
Half jacket
5. New Job
For more information on jobs
&
, refer to the section Tracing > Shape management and storage
(
F
p.23)
.
6. Tracing cycle initialization
Always browse from left to right: depending on your selection, certain menus will be available while
others will not.
b. Jobs and working modes
Jobs
A job consists in all the actions to be carried out to produce a pair of glasses. It can be managed in two
ways:
• Saving: allocate an ID and a reference to the job to save it and re-use it later.
◦ Automatic job archiving
◦ Mandatory in the tracing - tracing work mode
• Without saving: working in common mode (job identification by the letter A) enables you to process a
job quickly without saving it.
◦ The job processing cycle must be finished before starting another.
◦ If the cycle is stopped, a warning message is displayed and it is recommended to save the job.
Working modes
There are two working modes for managing your jobs:
• The tracing-centering mode (by default)
• The tracing-tracing mode
The selected work mode is shown in the information bar, to the left of the Essilor logo. You can change it in
the tracer settings.
Working in the tracing - centering mode
U
SER
M
ANUAL
> II. T
RACING
21
Pro-B 300 > v1.0 - 03.19