Essilor Instruments VISIOSMART 500, Быстрый старт

Страница: 27 / 32

27
2. Modifications
General information
The information contained in this document is non-contractual and provided as a guide. It may be changed without prior
notice. Errors or omissions may occur in this type of document, although the greatest care has been taken to ensure the
accuracy of the information provided. Essilor cannot be held responsible for any malfunction or loss of data resulting from
such errors or omissions.
3. Confidentiality and customer data
The device is a system that can save/store/share relative information with the customer such as customer’s measurements
and name It is the device’s user’s responsibility to comply with patient data confidentiality regulations, applicable on their site.
4. Declaration of conformity
Complies with marking
Lifetime: 7 years.
Date of first marking: January 2019
This device complies with the restrictions imposed by section 15 of the FCC regulation. Its use meets the following conditions:
(1) this device should not cause interferences and (2) must be able to deal with interferences from external sources, in
particular those likely to cause malfunctions.
In accordance with the requirements of FCC rules, any modification made to this equipment which is not expressly approved
by ESSILOR INTERNATIONAL will nullify the user’s right to use this device.
This equipment has been tested and deemed compliant with the limits imposed for Class-B digital devices according to Part
15 of the FCC regulations. Those limits are set so as to ensure reasonable protection against interference in a residential
environment. This equipment generates, uses and can emit radio frequency energy likely to cause radio communication
interferences if the device is not installed and used in strict compliance with the manufacturer’s instructions. However, there
is no guarantee that there will be no interference in certain conditions. If this equipment becomes the source of interference
with radio or television reception (this can be confirmed by switching off the device then turning it back on), the user may
be able to eliminate this interference through one or more of the following measures:
● swivel or move the affected receiver or its receiving antenna;
● move the device away from the affected receiver;
● To connect the device to a different circuit from the one, which powers the receiver in question;
● Request help from the retailer or a qualified radio/television technician.
Interference and micro-outages
The products have been designed to withstand interference and operate despite its presence and the possibility of micro-
outages on the network. However, if these problems are too serious and abnormal, the normal functioning of the machine
could not be guaranteed.
5. Copyright
Copyright © 2019 Essilor - Translation of the original handbook
All rights reserved. Any reproduction of the content of this document, either in part or as a whole, for the purpose of its
publication or dissemination by any means and in any format whatsoever, even free of charge, is strictly prohibited without
Essilor’s prior written consent.