Essex Electronics SKE-26B Скачать руководство пользователя

Страница: 29 / 32

Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com

altered, obliterated or removed. In no event shall Essex be liable for

any damage to persons, property or area surrounding the installation

site caused by any malfunction of the product manufactured or supplied

by Essex.
Essex will not pay, nor be responsible for shipping, transportation or

delivery charges, or other cost of removal of a defective product or

installation of a replacement product. The original component replaced

under this Limited Warranty in any system shall become the property

of Essex and as such will, at our request, be returned to our factory

with transportation charges paid by the Buyer.

Limited Lifetime Warranty:

Products carrying Limited Lifetime

Warranty against defects in materials and workmanship are Essex KTP

Series Keypads, K1 Series, SKE Series Keypads, KE-265 Series, PEB

Series and Hand-E-Tap Series Door Access Switches. Only products

with a manufactured date of 5/1/06 to the present date are covered by

this Limited Lifetime Warranty.

Limited 18 Month Warranty:

Products carrying an 18 month warranty

against defects in materials and workmanship include External

Power Supplies, Hand-E-Wave™, HID Edge® controllers, products

with embedded 125 kHz and 13.56 MHz Card Reader processors

including the PiezoProx®, iSMART™, K-Prox, RoxProx™, RoxClass™,

T-Prox™, iRox™ and iRox Plus™.

Limited 3 Year Warranty:

Essex KE-1700 Series and AKE-5 Series

are covered by a 3 year limited warranty against defects in materials

and workmanship.

Limited 2 Year Warranty:

Essex products used for Elevator access

control applications are covered by a 2 year limited warranty. This

includes the KE-1000, KE-1900 and SKE-34 used in an elevator access

control installation.
Essex Electronics, Inc.’s liability and Buyer’s remedy under this

warranty is limited to the repair or replacement at Seller’s election

Содержание SKE-26B

































Результаты поиска

Содержание SKE-26B

Отзывы:

Похожие инструкции для SKE-26B

Бренды по названию

Популярные бренды

Essex Electronics SKE-26B, Инструкция по установке и эксплуатации

Результаты поиска

Содержание SKE-26B

Отзывы:

Похожие инструкции для SKE-26B

Бренды по названию

Популярные бренды