Essentials C50BS14, Инструкция по эксплуатации

Страница: 8 / 20

INSTALLATION
8
1. At the top of the refrigerator, use a flat
bladed screw driver to remove the 4
screw covers from the refrigerator lid.
2. Remove the 3 bolts and upper hinge that
hold the upper door in place. Carefully
lift the upper door out and place on
a padded surface to prevent from
scratching.
4. Between the upper and lower door,
remove the hinge hole covers from the
left side of the unit and transfer them to
the hinge holes on the opposite side of
the unit.
3. Remove the 2 flange screws, then remove
the middle hinge that holds the lower
door in place. Lift the lower door and
place it on a padded surface to prevent
from scratching.
• Ensure the unit is unplugged and empty.
• To take the door off it is necessary to tilt the unit backwards. You should rest the
unit on something solid, e.g. a chair just below the top panel.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner