4.1 M30 x 1.5
1. Unscrew your existing radiator thermostat.
2. Screw the TV02 smart radiator thermostat directly onto
the radiator if the connector type is M30 x 1.5 (picture shown
as below). You can adjust the angle to make the led facing
the viewer properly.
3. Rotate the thermostat dial to the maximum value.
4. Check, if the valve (©) is active.
5. Install the device
Содержание Bluetooth Round
Страница 8: ...Ebene A Ebene B ...
Страница 32: ...Plane A Plane B Plane A is aligned with plane B See figure ...