IMPORTANT ASSEMBLY TIPS
�
To avoid potential damage to the umbrella, please read the following instructions before using.
�
Failure to follow instructions may result in permanent damage to the umbrella.
UMBRELLA ASSEMBLY
Insert the bottom pole into an umbrella base. Use an Umbrella Base (sold separately) to help stabilize
the umbrella. The umbrella bottom pole must be securely fastened to the umbrella base.
Hold the top portion of the umbrella upside down and shake gently, allowing the ribs to fall naturally into
the open position.
Slowly push the center ring up to its full open position.
Turn the top portion of the umbrella upright and insert the top pole into the bottom pole. The push button
located on the top pole must be completely extended through the opening on the bottom pole.
You may now crank the umbrella to its fully opened position.
CARE AND CLEANING INSTRUCTIONS
�
Wash with mild soap, rinse with water, let air dry.
�
Do not leave the umbrella open during high winds. Keep umbrella closed during windy conditions.
�
Always let umbrella dry completely before storing.
CARE INSTRUCTIONS
Umbrella – Wash with a mild solution of soap and water, allow umbrella to drip dry in the open position. Dry
umbrella pole completely. Keep umbrella closed when not in use. To prevent damage to your table, always
use an umbrella base with your umbrella. In extreme windy conditions, it is recommended that you remove
the umbrella from the table and store.
1
2
3
4
2
Made in CHINA for Kmart Corporation, Hoffman Estates, IL 60179
SHOP kmart.com
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
For questions or comments about product:
Call toll-free: 800-457-4652
Please refer to part numbers when reordering
5
To close the umbrella, push the center ring up, press the push button in and slide ring down to its closed position.
