essentia
audio
too s
Safety precautions
For your protection and safe operation of the unit, please read the following:
Avoid water and other liquids
To avoid risk of fire and electrical shock: do not expose this device to moisture. Use indoors
and in dry locations only. Do not expose to dripping and/or splashing. Do not place objects
filled with liquids, such as vases, on or near the device. Do not operate the unit if any liquid
is spilled on or into the unit; return it to your dealer for servicing.
Don't open the device
To avoid risk of electrical shock: do not open the device. There are no user serviceable
parts inside. Repairs are to be performed by qualified personnel only.
Unplug before cleaning
Always unplug the unit before cleaning. It is only necessary to clean the unit with a clean,
dry cloth or duster. Do not use any cleaning solutions, sprays, or water.
Connect to mains ground
For safety reasons and to protect connected equipment, this product MUST be connected
to mains with a three conductor power cord which includes a working ground conductor.
The power cord MUST be plugged into a grounded AC power outlet (3-pin). Do not use a
3-to-2-pin adapter to defeat the grounding pin. Failure to plug this product into a
grounded outlet through a ground conductor including mains cord may result in personal
injury or damage to your equipment. Call a licensed electrician if you are unsure if your AC
outlets are properly grounded.
Do not overload individual outputs
Do not connect loads which draw more current than the maximum rating for each
individual outlet. Possible damages due to exceeding these maximum ratings will void
warranty. The MAXIMUM CURRENT rating for each outlet may differ, please look at the
Specifications
for maximum loads.
Do not exceed maximum total load
The total current drawn from all outlets together may not exceed 16 Amps. At 230 Volts
mains this is equivalent to 3680W.
Check your supply voltage
This device is designed for 220-240 V ~ AC, 50/60 Hz mains supply. Connecting to a different
voltage may damage the device and warranty will be void.
Avoid condensation
If the device is moved from a cold to a warmer area, allow warming up to ambient
temperature for at least 1 hour without connection to the mains supply. This to avoid
condensation inside the device.
Connect power cords safely
Power supply cords should be routed in such a way that they are not likely to be walked on
or pinched by items upon or against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the appliance. Do not route
power cords near heat sources.
5.