ESUG0
5165 Re
v. 1
.0
2
Align the two units
using the dots
1
Open the sensor and
insert the battery
3
Peel off the protective strips
4
Press one unit on the door
or window and the other
on the frame
Press any button a few times to discharge the device
Open the battery cover
In the app, tap
and then
DEVICES
.
Tap
Add device
,select
Remote Control
, and assign a user
Insert the battery and close the cover
To install additional devices: in the app, tap
and then
DEVICES
. Tap
Add device
, and follow the on-screen instructions.
2
5
For more information about installing and using the WeR@Home
TM
system, see
http://www.essence-grp.com/resources/smart-living-download.html
1
Remove the mounting base
and insert the batteries
2
Replace the mounting base and
peel the strips off the adhesive tape
3
Press the siren against the wall
3
Install the peripheral devices
Remove the mounting base
1
Remove the back cover
(camera only) and insert
the batteries
2
Peel off the strips.
Only use the adhesive tape
needed for the installation
(flat wall or corner)
3
Press the mounting base
against the wall or corner and
insert the device
4
Motion Detector
Camera
●
Between 2.1 m (6.9 ft.) to
2.3 m (7.5 ft.) high
●
A clean, dry, smooth, and
flat wall, or in a corner
●
Spherical lens facing
downward
●
Not facing windows,
sunlight, or a strong light
source
●
Within 6 m (20 ft.) of the
coverage area
www.essence-grp.com • [email protected]
© 2018 All rights reserved to Essence Security International (E.S.I.) Ltd.
Location:
1
2
3
4
5
Install the door/window sensor
Register the remote control (key fob)
Install the siren
Install the camera and motion detector
Legal notice:
http://www.essence-grp.com/html/concerning_documents.html
For installing
in a corner
For installing
on a flat wall
