INSTALLING WITH SCREWS
34
WeR@Home™ S5 User Guide
Installing the Motion Detector
1.
To install in a corner, or angled on a wall, drill out the hole guides as shown below:
2.
To install flush against a wall, drill out the hole guides as shown below:
3.
Position the wall mount against the wall or corner at a height of 2.2 m (7.2 ft.)
4.
Mark the position of the screws through the holes in the wall mount.
5.
Drill holes where marked and insert the wall anchors.
6.
Align the wall mount with the wall anchors.
7.
Screw the screws through the wall mount, into the wall anchors.
Содержание WeR@Home S5
Страница 1: ...WeR Home S5 User Guide May 2021...
