Installing Without the Active Service
4
Care@Home™ Emergency Pendant Advanced User Guide
2.
Installing Without the Active Service
If the resident does not have the
Active
service, installation requires pairing the EPA with the CP.
To pair an EPA:
1.
Press the
PAIRING
button on the CP for five seconds. The CP beeps and the ring around the
EMERGENCY
button lights up in blue, with a circular movement effect.
Figure 2: Pairing with the CP
2.
Holding the EPA, move about 50 cm (20 in.) away from the CP.
3.
Press the EPA button.
4.
Ensure that the pairing process is successful. The process can have the following results:
Success
The CP beeps and the
EMERGENCY
button ring blinks blue three
times.
Failure
The CP beeps and the
EMERGENCY
button ring lights up red for two
seconds. Try to pair the EPA again.
Already paired
The CP beeps and the
EMERGENCY
button ring lights up alternating
between red and blue.
NOTE:
If no additional peripheral devices can be integrated, as when the CP
memory is full, the CP beeps and the
EMERGENCY
button ring lights up red.
EMERGENCY
Button:
50 cm (20 in.)
PAIRING
Button
